Aver NXU Lite Bedienungsanleitung PDF herunterladen (Seite 123)

115

4. In (3) Conditions, you can set “Trigger if any” to activate if it falls to one of the conditions or

“Trigger if all” to activate if it falls to all conditions.

- Motion Detected: select and click on the camera number (01 to 16) to set the condition for

the system to alarm. Right-click on the camera number to setup the system to send out the

alarm when motion has been detected last the time that user has entered in Continuous

trigger duration.

- In Video Loss, click the camera number (01 to 16) to set the alarm condition when video is

lost. Right-click on the camera number (01 to 16) to setup the system to send out the alarm

when video has been lost to last the time that user has entered in Continuous trigger

duration.

5. In (4) IP Camera Sensor to configure sensor status of IP camera. Click High/Low to set sensor

status to high or low.

- Continue trigger duration: Set a time period for system to send out the alarm when sensor

has been trigger and stay in the same status for a period.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 186 187

Keine Kommentare

Aver NXU Lite Bedienungsanleitung Seite 123