Aver NXU Lite Bedienungsanleitung

NXU Lite User’s Manual Ver.1.1.0.2

2 16CH NXU System Item Recommended Motherboard Intel G41/P43/X58/H55/P55/H61/H67/P67/Z68 chipset CPU Dual core CPU is highly recommended RAM 4G

92 3.2.1 Create a Camera Group Follow the below steps to create a camera group. The maximum of group number is 64. The default group can be deleted

93 3. Drag the camera from Camera list section to the group. 4. Right-click the camera can rename, delete, display/no display video of camera, and

94 9. User can easy to view and manage the camera group in preview/advanced mode by click camera tree icon (see also Chapter 2.3(11) Camera Group Tr

95 3.2.2 IP camera PnP Setup To connect AVer IP camera series without any configuration; just easy as plug and play. i - The IP camera PnP setup no

96 3.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to

97  Daily Record Mode: Setup the recording schedule by date. 1. Select the date from calendar. 2. Then, select the recording mode – Always, Moti

98 The recording modes are listed below: - Always Recording Record the video from the selected camera and save it to the designated storage pa

99  To show and change the color of the Mask 1. Enable the Show Mask check box. 2. In the Color section, select the color and click button. (5)

100 3.4 Network Setting In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Defau

101 (5) Remote Control Server Enable/disable remote control from remote application (ex. CM3000). Enter the remote accessing port in Port column. The

3 1.2 Dual Monitors Setup The NVR system Supports Single and Dual monitor displays. When using dual monitors, the Emap and Playback function will be

102 - Enable HandyViewer Enable remote users to use a PDA or a mobile phone to access NVR server and select the video size and quality. (See also Ch

103 3.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The numb

104  Delete or overwrite old backup file when the HDD is full: The NVR system will automatically erase the old backup data when the hard disk is fu

105 3.5.1 To set schedule at a specific portion of time in that hour 1. Right click the colored blocks. 2. In the Select time dialog box, click

106 3.6 Backup Setting In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 rep

107  Require Space: Show the total size of the selected file 4. Enable Auto partition and select to divide the file size into DVD-R or CD-R. NVR a

108 3.6.1 Setup Quick Backup Set a quick backup rule for user can pressing Ctrl + B to execute backup instantly. 1. Click Quick Backup 2. In Quick

109 3.7 Sensor Setting The I/O device must be installed to use this function. The NVR system also support external I/O box and user can install exte

110 3.8 Relay Setting The I/O device must be installed to use this function. To set the Relay Setting: 1. Click the drop-down list and select

111 3.8.1 To Setup External I/O Box i NVR system needs to purchase and install the E-I/O box in order to have the sensor and relay connection. The

4 3. If user selected Basic mode, press the Quick Settings tab. Then select the Select a different desktop mode and click Go. 4. Select the Extend

112 8. To add more than one external I/O box, click Add and follow the above steps. 9. In External I/O box setup dialog, user will see all added E

113 12. All connected External I/O box and their modules will be listed as tree topology in External I/O Setup window. 13. To view the all I/O devic

114 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm sett

115 4. In (3) Conditions, you can set “Trigger if any” to activate if it falls to one of the conditions or “Trigger if all” to activate if it falls

116 6. In (5) Abnormal Event to set the condition of the event for system to alarm.  System Reboot: when the NVR system reboot without abnormal c

117 10. In (9) Priority, user can set the priority of this alarm. The priority of the alarm can be seen in CMS site (Central Management System). 11

118 - IP Camera Relay Set to enable/disable the relay operation when the alarm is activated. - Play Warning Sound Play alarm sound. To setup click

119 - Snapshot Take a snapshot when the alarm is activated. a. Select Camera: specify which channel video to be snapshot when the alarm is occurred

120 3.9.1 To Setup the Alarm Sound Setting 1. Beside the Play Warning Sound check box, click Detail. 2. In the Alarm Sound Setting dialog box, c

121 3.9.2 To Setup Send E-mail Setting Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and save th

5 6. In Display Manager, right click on the second Display on the right side and select Extend Main onto monitor. 7. Adjust each monitor resolutio

122 3.9.3 To Setup FTP Setting 1. Beside the File Transmission via FTP check box, click Detail. 2. In the FTP Setting dialog box, enter the FTP IP

123 3.9.4 To Setup Alarm Recording Setting 1. Beside the Start Recording check box, click Detail. 2. In the Alarm Recording Setting dialog box, se

124 3.9.5 To Setup SMS/MMS Setting To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside

125 3.9.6 To Setup PTZ Preset Point Next to the PTZ preset point check box, click Detail. 1. Select Camera: In the Trigger PTZ Preset Setting

126 3.9.8 To Setup CMS Setting Next to the Send to CMS check box, click Detail. Click OK to accept the new settings and Cancel to exit without savin

127 3.10 User Setting Users with Administrator privileges can access User Setting. The maximum user accounts are 256. In the User Setting dialog box

128 - Remote Record Allow the user to record video at remote site. - Remote Setup Allow the user to modify the NVR system setup from remote site. -

129 Chapter 4 Playback Backup Video on PC You can playback the backup files using QPlayer applications. When you back up the recorded file, QPlayer

130 Name Function (4) Hour Buttons Select and click to playback the recorded video file on the specific time frame. i The Hour buttons represent th

131 Name Function (8) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode, click the camera ID number to s

6 1.2.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768, 1

132 Name Function (19) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless picture and #2, if

133 Chapter 5 Using the Remote Programs You can use Microsoft Internet Explorer to access NVR server by entering the IP address or domain name. To u

134 5.1 Familiarizing the PCViewer 5.1.1 PCViewer Screen Right-clicking on the PCViewer video screen, enables user to start video record

135 Name Function (1) DirectDraw Enhance the video quality. i Not all graphic cards can support this function. If you cannot see the

136 5.1.2 PCViewer Control Panel Name Function (1) Preview Mode Switch to preview mode control panel. (2) Playback Mode Switch to playback mode c

137 Name Function (5) Select cameras to view Select to the view camera from different server. In Select Camera dialog box, Display column

138 Name Function (17) Atuo Pan Enable the PTZ cameras automatically based on the selected camera group preset position number. (18) Zoom +/- Zoom

139 5.1.3 Playback Mode Control Panel i The PCViewX.cab. installation is required for first time using PCViewr playback function. The PCViewX.cab in

140 Name Function (7) Play button After select the file, click it to start playback. Move to the begin Move to the end Time progress ba

141 5.1.4 To Setup Remote System Setting There are two type of remote setup mode – Basic Setting and Advance Setting. Select the setup mode and clic

7 1.3 Software Installation Please read the following information before install NXU Lite NVR application. If user has installed AVer NV DVR system

142 still record the video and preview it in playback mode. - Name Change the camera name. - Description Add a short comment.

143 Advance Setting In Advance setting, user can configure remote NVR in more detail. System Setting In the System Setting window, click Update to a

144 (4) Login Enable the conditions in Login section you want the system to automatically carry out. - Auto record when login Automatically start

145 - Beep if no signal Make sound when the video signal is lost. - Mandatory Record Always record video when software is running - Enable Overlay

146  IPCam Module: displays current IP camera patch version. Click Update button to upgrade the IP camera patch. i The NVR system only accepts vers

147 Camera Setting Select the camera from remote NVR servers to modify settings. In the Camera Setting window, click Update to save and apply the new

148 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default to revert

149 (4) Motion Detection Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is detected. When it detects

150 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click Default

151 (6) Voice Phone Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using microphone. Mak

8 Follow the below steps to install the NVR application: 1. Place the Software CD into the CD-ROM drive then click Install Surveillance System. Then

152 - Network Bandwidth Limit  By Channel: Set the network bandwidth by each channel.  All: Set the total network bandwidth consumption limit.

153 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm setting,

154  Abnormal Reboot: when the NVR system reboot in irregular condition, the system will send out the alarm message.  Recording is switched off:

155 7. In (6) Action, you may now set the alarm action for the system to perform when the alarm condition is activated. - Launch E

156 - Modem Dial up Setting User may set the time to disconnect automatically, just enable the Auto Disconnect after check box and set time. To Set

157 To Setup Alarm Recording Setting 1. Next to the Start Recording check box, click Detail. 2. In the Alarm Recording Setting dialog box, select t

158 To Setup CMS Setting Next to the Send to CMS check box, click Detail. Click OK to accept the new settings and Cancel to exit without saving.  C

159 5.2 Familiarizing the Remote Console Buttons Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from 6 different spl

160 Name Function (12)Snapshot Capture and save the screen shot either in *.jpg or *.bmp format. (13) Event log Show the record of activities that ta

161 5.2.1 To Setup Remote Console Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. (1)(2)(3)(4)(5) (1) S

9 4. Setup the User name and Password for login NXU Lite system. Re-enter the password in Confirm password column and click Next to go next step. 5

162 In the Map Network Drive window, select the Drive and fill in the network drive direction in Folder column if you know. Or click Browse to

163 (5) Channel Settings The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section, enable the camera number to receive the

164 5.4 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, ch

165 To Make a Selection: 1. Select the date in the calendar. Use and buttons to shift the calendar to the left or right. 2. In the table be

166 5.4.1 Familiarizing the Local Playback Buttons Name Function (1) Split Screen Mode Select from 6 different split screen types to playback the r

167 Name Function (4) Hour Buttons Select and click to playback the recorded video file on the specific time frame. i The Hour buttons represent th

168 Name Function (8) Playback Switch to Playback mode. This allows you to view the recorded video file. (9) Status bar Display the recorded date, ti

169 Name Function (18) Turbo To improve the smoothness of live video. The default is enabled( ), but in following situation: - The channel is IP cam

170 5.4.2 Familiarizing the RealTime Playback Buttons Name Function (1) Exit Close the application. (2) Split Screen Mode Select from 6 different s

171 Name Function (5) Playback Control Buttons Faster: Play the recorded video file at the speed of 2x, 4x, or 8x, 16x or 32x. Next: Go to the next f

10 7. After installation completed, user need to restart your computer. Select “Yes, I want to restart my computer now” and click Finish to reboot c

172 Name Function (12) Full screen View in Playback-compact mode. To return, press the right button of the mouse or ESC on the keyboard. When you swi

173 5.4.3 Familiarizing the Download and Playback Buttons Name Function (1) Exit To exit application (2) Progress bar Show the progress of the file

174 Name Function (8) Full screen View in Playback-compact mode. To return, press the right button of the mouse or ESC on the keyboard. When you swit

175 Chapter 6 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM3000) insta

176 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating dom

177 II. Register the Domain Name on http://dyn.com/dns/ 1. Open the browser on your PC and enter the URL http://dyn.com/dns/ 2. Follow the DyDNS

178 Appendix B Network Service Port The following table shows the ports that NVR server uses for certain network service. Port # Variable Remote

179 LIMITED WARRANTY AVer Information Inc. warrants that this product to be free of defects resulting from faulty manufacturing or components under t

11 1.4 Running the NVR Software To run the application, double-click on your PC desktop or click Start > Programs > DVR > NXU Lite. For

i Manual Updates Following are listed the new functions for the version 7.9.1.0033a and above of NXU surveillance software. [Note] User can

12 Chapter 2 Using the NVR Software 2.1 System Setup Wizard The Setup Wizard can guide the user to complete the basic but important setting of DVR

13 2.1.1 System Setting Wizard In System Setting step, select the language of DVR system and interface, current time zone of DVR is located, setup n

14 2.1.2 Network Setting Wizard Setup the IP address of DVR and configure the DDNS. After completed all configuration, click Next to save the settin

15 i The DDNS setting is not required to setup if user hasn’t apply your domain name yet.  dyndns.org - Domain Name: The user has applied on websi

16  Register the Domain Name on http://ddns.avers.com.tw 1. User Login: Browse the website ddns.avers.com.tw with Microsoft IE or Netscape Navigat

17 2.1.3 Display Setting Wizard Set monitor resolution and frequency. The DVR system support dual monitor and user need to set a primary monitor w

18 2.1.4 Storage Setting Wizard To create partition, format the hard disk and select storage path for saving recording data. Also, user can setup iS

19 2. Click on the hard disk is in Volume Information table and click Create volume to set the size of partition. 3. User can enter the partition si

20 4. Each partition is assigned a letter as a volume ID. When user select a storage path, please remember the volume ID match to which partition. To

21 - Release the partition: User can delete the partition. When the partition has been deleted, all data save in partition will be erased 1. In Vol

ii Important Notice 1. On Windows XP platform, the each partition capability limit is 2TB. 2. We do not recommend using KVM device with NXU

22 - Format the hard disk: To format a hard disk or a partition. All data on the hard disk or partition will be erased. 1. Select

23  iSCSI: To connect the iSCSI server that user has on LAN network. 1. Click iSCSI button. 2. Enter the IP address or DNS name of the iSCSI ser

24  Storage Path Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically

25 2. In File Browser window, select the hard disk drive from Current Drive drop-down list. 3. Then, click New Folder icon to create a new folder f

26 6. After completing Storage setting, click Exit button and select Yes to save and exit the Setup Wizard. If user wants to modify some of setting,

27 2.2 Preview the Live Video After the successful login, the preview screen will be shown. User can start to connect IP camera, monitor live vide

28 Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the following: - Click Exit to close the NVR progr

29 Name Function (2) Split Screen Mode Select from 7 different split screen types to view all the camera, or one camera over the other or alongside o

30 Name Function (5) Network Enable/disable remote system access. This feature allows you to access NVR server from a remote location via internet co

31 Name Function (11) Camera Group Tree To view the user defined channel group tree(see also Chapter 3.2.2). Click + of group to extend group and dra

iii Manual Conventions The following conventions are used throughout this manual. Caution symbol is intended to alert the user of the important inst

32 Name Function (16) Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ESC

33 Name Function (22) Turbo mode To improve the smoothness of live video. The default is enabled( ), but in following situation: - The channel is IP

34 2.2.1 Setting Up and Using the Emap Emap can hold up to 8 maps in *.bmp/*.jpg format. You may locate the camera, sensor and relay on the map. i T

35 2.2.2 To Use the Emap 1. Click Emap. 2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the map

36 2.2.3 Familiarizing the Buttons in PTZ Camera Controller (9) (8) (7) (6) (5)(2)(1)(3)(4)(10)(11) Name Function (1) Close Exit PTZ camera controll

37 2.2.4 Using Event Log Viewer Show the record of activities that take place in the system. i - NVR system now supports HDD failure pre-detection

38 2. Select the Date to view or search certain event log by key word. Enter the key word in Find Text column and click Search button. 3. To filter

39 2.3 Using the NVR System in Compact Mode Compact mode provides bigger monitor view and less function buttons. To view in Compact mode, click Exit

40 Name Function (2) AutoScan Start/Stop video screen cycle switch (3) Alarm Alert and display warning information. (4) Playback Switch to Playback m

41 2.4 Playback the Recorded Video To switch in Playback mode, click Playback button at the lower right corner of Advanced/Preview mode user interfa

iv COPYRIGHT © 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted i

42 Name Function (1) Split Screen Mode Select from 6 different split screen type to playback the recorded video file of all the camera, or one camer

43 Name Function (3) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. When in sing

44 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

45 Name Function (11) Full screen View in Playback-compact mode. To return, press the right button of the mouse or ESC on the keyboard or click the a

46 Name Function (19) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless picture and #2, if

47 2.4.1 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress ba

48 2.4.2 To Bookmark a Section of the Video 1. Click Bookmark. The video playback stops when the bookmark button is executed. 2. In the Bookmark

49 2.4.3 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the

50 2.4.4 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (

51 2.4.5 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intelli

v TABLE OF CONTENTS MANUAL UPDATES ... I IMPORTANT NO

52 2.4.6 Watermark Verification Now, NVR supports watermark-checking to identify the authenticity of playback video. NVR program can only verify one

53 2.4.7 To Setup the IP PTZ Camera 1. In the PTZ control panel, click Setup. 2. When the PTZ Setup dialog box appears, click IP PTZ tab. 3. Sele

54 10. Show moving direction indicator line: enable/disable to show the direction line when uses mouse drag on screen in PTZ mode. 11. Iris: To adjus

55 16. User also can click PTZ icon to call out on-screen PTZ control bar and use mouse to drag on screen to move the PTZ camera lens direction. 17.

56 Chapter 3 Customizing the NVR System In the Preview/Advanced screen mode, click button to customize your NVR. When the NVR configuration set

57 Enable network storage first, and then, click Add. In Browse For Folder window, select drive C and right click mouse button, select Map Network Dr

58 (2) Hard Disk Calculator Estimate the hard disk recording capacity. The result of calculation is a rough value which only for reference. The

59 - Silent Launch Enable the NVR system minimizes on the system tray automatically right after start up. - Guest Mode Automatically log in Guest m

60 - Beep if no signal Make sound when the video signal is lost. - Shutdown OS when exit Turn off the PC when the NVR application is being clo

61 (8) Dual Monitor Enable/disable dual monitor display. Click Setting to select display order of Preview (main system), Playback, and EMap. (9)UPS

vi CHAPTER 3 CUSTOMIZING THE NVR SYSTEM ... 56 3.1 SYSTEM SETTING ...

62 (10) System Configuration The System Configuration is in different display on Window XP and Windows 7. Following are described System Configuratio

63 HDD Management To manage and format the hard disk is installed inside the DVR system. The DVR system can format the HDD that is th

64 Network Setting To configure the network setting (IP address, subnet, DNS, and son on…) of the system.  Obtain an IP automatically (DHCP): To u

65  Map Network Drive: To add network storage, the Internet storage drive/folder must be mapped as Network Driver in DVR server. Follow the below s

66 Audio Setting To adjust audio volume of system. Others

67 Printer Setting Click Add Printer and following the wizard to install a printer. Regional/Language Setting When DVR application is using differen

68 Power Management To configure UPS. Click Select… to select the UPS that has connected with DVR system. Device Management To manage the DVR system

69 Network Connection To manage the connection of the network. Phone and Modem options To setup the modem dial-up settings.

70 Date/Time Setting 1. Select the Time Zone of DVR server located 2. Select the Month and Date. Click arrow button can switch to different month.

71  Windows 7 In System Configuration section, user can setup keyboard language, printer, PPPoE setting, Audio, Phone and Modem, Map/Disconnect net

vii System Setting ... 143 Camera Setting ...

72 Memory Displays DVR system’s memory usage. Network Displays DVR system’s network usage. Click drop-down list to select LAN2 and view LAN2 usage

73 CameraInfo Displays DVR system’s cameras information – Camera name, ftp in Live and Recording, and current status. In Status, a is analog camera c

74 S.M.A.R.T Displays DVR system’s hard disk information. User can view information of each hard disk or hard disk portion on DVR system. Double-c

75  Keyboards/Input methods Select the keyboard or input language.

76  PPPoE Setting To configure the LAN setting of DVR system. 1. Click PPPoE Setting. 2. Then, the DVR system will require rebooting the

77 3. After DVR system reboot, Click Setup >> System >> System Configuration >> PPPoE >> Add button >> Broadband(PPPoE

78 4. Enter the PPPoE’s User name and Password. Mark Remember this password and keep Connection name as default -- Broadband Conne

79 6. User will see the name of PPPoE connection that user has setup list in Dial-up and Virtual Private Network settings. 7. Then, click OK and re

80  Sounds Setting Adjust audio volume of system.  Printer Click Add Printer and following the wizard to install a printer.

81  Device Management To manage the DVR system devices.  Phone and Modem options To setup the modem dial-up settings.

1 Chapter 1 Introduction AVer NXU Lite is a NVR application that can connect up to 32 AVer IP cameras for monitoring, recording, and playback. 1.1

82  Map Network Drive To add network storage, the Internet storage drive/folder must be mapped as Network Driver in DVR server. Follow the below st

83 (11) System Controller Setup To configure the parameters that is for communicating with the System Controller (an optional accessory). For operati

84 3.2 Camera Setting In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default1

85 (5) Use IPCAM motion detection Enable to use the motion detection function of IP camera if the IP camera has support motion detect

86  Auto Search: User can click Auto Search to find the IP camera that can be detected by NVR system on the LAN network. IP Camera Information sect

87 After clicking the camera, user can configure IP camera’s IP, Mask, Gateway, and Web port. Also, user can change camera’s IP mode – DHCP or Static

88 - Add Remote DVR: After select camera type as Remote DVR, click Add IPCam button to make a connection to remote DVR/NVR server. In Remo

89 User can select Video size, Frame rate, Video Quality Mode and Quality of camera. And scroll the bar to adjust the Brightness, Contrast, and Sharp

90

91  Relay Setting: To setup relay device that is embedded on the camera. 1. Click the drop-down list and select the relay ID number. 2. Enter rel