Aver NXU Lite Bedienungsanleitung PDF herunterladen (Seite 117)

109

3.7 Sensor Setting

The I/O device must be installed to use this function. The NVR system also support external I/O box

and user can install external sensors. For external sensor setting, please referring to the sensor

vendor user’s manual.

To Set the Sensor Setting:

1. Click the drop-down list and select the sensor ID number.

2. Enter sensor name.

3. The system automatically detects the card and input number. In the Content section, enter sensor

description.

4. In the test section, click Test to check the sensor status. Red is high and Green is low.

5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.

6. Click External IO to configure external I/O device if it is available (see also Chapter 3.8.1). When

external I/O is set and it will be available in drag down list for selecting.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 186 187

Keine Kommentare

Aver NXU Lite Bedienungsanleitung Seite 117