Aver SecureCenter Bedienungsanleitung PDF herunterladen (Seite 43)

 Sequence: Set the selected channel to automatically switch to display all camera channels

in cycle.

 Matrix: set the selected channel to receive and display the alarm event from selected NVR

servers. Click Setup to select the NVR servers. Enable the Retrieve time to set a period

time (0 ~ 255 sec) for alarm event to display. If the retrieve time doesn’t enable, the alarm

event will display on screen until next alarm event come in.

On the NVR site, user need to enable and configure the matrix to send to

SecureCenter (please refer to Alarm Setting of NVR user’s manual).

 Image: To insert an image on selected channel. The image supports *.bmp and *.jpg format.

Click Setup and browse where the image located is.

18. Click OK to save the setup. To exit without saving, click Cancel.

19. To delete the monitor set, select the monitor set in Monitor Select window and click Delete

button.

20. To modify the monitor set, select the monitor set in Monitor Select window and click Edit button.

21. To use the Monitor function, please see Chapter 3.3.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Keine Kommentare

Aver SecureCenter Bedienungsanleitung Seite 43