Aver SF2111H-BR user manual Bedienungsanleitung Seite 1

AVer SF2111H-BR User Manual

4 Package contents Item Descriptions 1. SF2111H-BR 2. Stand (The stand is well assembled while shipped out) 3. Accessory pack 4. Etherne

5 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.

6 Hardware Installation and I/O Pin Assignment 1. Connect a power adapter and IP camera to PC or local network. 2. The SF2111H-BR is equippe

7 Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standard LAN inf

8 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “IP i

9 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

10 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it th

11 Finding IP Camera by using “IP installer” 1. Use the software, “IP Installer” to assign the IP address of the IP camera. The software is in the a

12 IP Installer configuration: 6. IP Installer will search all IP cameras connected on the LAN. The user can click “Search Device” to search again.

13 Using DHCP Server/Router Network To use DHCP, please check DHCP and click “Submit” then click “OK”. It will apply the change and reboot the Device

14 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

15 IP camera IP addresses: 8. A quick way to access remote monitoring is to left-click the mouse twice on a selected IP camera in “Device lists”

16 9. Then, please key in the default “User name” and “Password”, both of which are “admin”.

17 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

18 5 When the following dialogue box appears, click “Yes”.

19 Using the IP Camera Browser Interface The admin have the full access to the IP Camera browser interface. The menu on the left, you can expand and

20 Name Function (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera’s current firmware version (5) Lo

21 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

22 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from our

23 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

Table of Contents PREFACE ...

24 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the c

25  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.  Us

26 System > Network Setting > Setting  Network Type: IP camera supports DHCP, static IP and PPPoE. After completed all settings, click Apply

27 System > Network Setting > Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the vid

28  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Password

29  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed(

30 System > Network Setting > Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to s

31  ONVIF: User can enable ONVIF standard and select the ONVIF version or disable it.  Security: Yes is required account and password to connect w

32 System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server.  M

33 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

SYSTEM > ADVANCE> HTTPS ... 37 SYSTEM > ADVANCE >

34 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

35 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

36  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here (Safari supports Bonjour protocol).  LLTD: If

37 System > Advance> HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over the intern

38 Created Request: Setting the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Create Self

39 System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware.

40  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only t

41 System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick the "

42 System > Advance > QoS/DSCP QoS/DSCP(Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classifying a

43 System > Image Admin and operator levels can adjust the Image setting. There are 4 tabs: OSD, Preference, advanced, and Privacy Mask. Syst

GOVERNING LAW AND YOUR RIGHTS ... 67

44 System > Image > Preference In Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust the brigh

45 System > Image > Advanced Click Default button will back to factory default setting.  Sense-UP: The main purpose of sense-up is to provide

46 System > Image > Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Area 2, Ar

47 System > Video Stream > General  Video System: Select the video format.  TV Output: Select the video format of TV Output. (depending on

48 System > Video Stream>Stream1  Basic Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can be chosen – 1920

49  VBR: 1(Low) ~10(High) – Compression rate, the higher the compression rate, the better the picture quality is; vise versa. The balance between V

50 System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can select -- 192

51  Advanced Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can select -- 1920x1080, 1280x720, 640x480, 320x240,

52 System > Video Stream > Stream3 3GPP Streaming is designed for mobile viewing.  Stream 3 Setting: Enable or Disable 3GPP Streaming. 

53 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera built-in MIC (depending on different models) to remote

54 System > SD Card Please unscrew the microSD card cover to install microSD card. Please insert microSD card before using it. Make sure pushing

55 Event > Arrangement > Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to

56 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record s

57 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

58 Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to some speci

59 Output Setting: Mode setting: OnOff Switch: Relay status is based on sensor triggered times. Time Switch: To restore the origin

60 Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera and PC con

61  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IP camera and PC connect to the internet d. Device nee

62 Factory Default 1. Remove the Ethernet cable and power adapter. 2. Take an electronic wire, plug one side of the wire into “Default” and the oth

63 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for SF2111H-

1 Preface The SF2111H-BR is an H.264 2-megapixel; full HD bullet camera designed for indoor and outdoor use with a mechanical IR-cut filter and

64 Appendix SF2111H-BR is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class 4 above (Ma

65 COPYRIGHT © 2012 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in

66 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

67 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

2 Hardware Audio In 1 G.711 (64K) and G.726 (32K,24K) audio compression Input : 3.5mm phone jack, audio in Audio Out 1 / Output: 3.5mm phone jac

3 System Security Password Protection, QoS/DSCP, IP address filtering, HTTPS encryption, data transmission Firmware Upgrade HTTP mode (Can Be U