Aver FV1306 user manual Bedienungsanleitung

AVer FV1306 User Manual

4 Package contents Item Descriptions 1. FV1306 2. Accessory pack 3. Conversion ring 4. Power Adaptor(DC 12V/0.5 5. CD (User’s Manual, Quic

5 ENGLISH Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)

6 Hardware Installation and I/O Pin Assignment 1. Set the camera Locate cable from bottom a. Use three screws to lock the base of camera on the

7 ENGLISH Locate cable from side a. Open the conversion ring package in accessory. It includes a conversion ring and two set of screws. b. Use thr

8 2. When removing the dome cover, you can see the Micro SD card slot and the reset button. 3. I/O Interface I/O Connection a. Please connect the

9 ENGLISH Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standar

10 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “AVe

11 ENGLISH 3. Click “Setup” button. 4. Click “Add IPCam” button.

12 5. Select “IP Camera” item. 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera.

13 ENGLISH 7. In Search Result window, click it the IP camera model that user has purchased (Please ignore ONVIF connection item); the camera is in

14 Finding IP Camera by using “AVer IPCam Utility” 1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The software

15 ENGLISH 5. The IE browser will open and direct you to IP camera login page. This requires IPViewer.ocx to run. If the IE ActiveX warning message

16 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

17 ENGLISH IP camera IP addresses: A quick way to access remote monitoring is to double-click on a selected IP camera in “Camera Name list” in AV

18 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

19 ENGLISH 5 When the following dialogue box appears, click “Yes”.

20 Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can expand and

21 ENGLISH Name Function (2) Login IP Show PC’s IP address (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show

22 Name Function (14) Direction Controller Move the position of the view point while in zoom mode. User has to zoom in first.

23 ENGLISH System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time s

Table of Contents PREFACE ...PRODUCT SPECIFICATIONS ...

24 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from ou

25 ENGLISH System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time.

26 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the c

27 ENGLISH  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.

28 System > Network Setting > Setting  Device Name: Used to name the IP camera to search more easily for this specific one among all connecte

29 ENGLISH System > Network Setting > Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out

30  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Password

31 ENGLISH  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection

32 System > Network Setting > Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to s

33 ENGLISH  RTSP Port: setup port for RTSP transmitting (Default: 554)  RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecti

SYSTEM > NETWORK SETTING > OTHER 2 ... 34 SYSTEM > NETWORK SETTING &g

34 System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server.

35 ENGLISH Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Selec

36 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

37 ENGLISH [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number)

38  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here.(Safari supports Bonjour protocol)  LLTD: If

39 ENGLISH System > Advance > HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over th

40 Created Request: Setting the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Create Self

41 ENGLISH System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware

42  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only t

43 ENGLISH System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick t

COPYRIGHT ...NOTICE ...

44 System > Advance > QoS/DSCP QoS/DSCP (Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classifying and

45 ENGLISH System > Image Admin and operator levels can adjust the Image setting. There are 4 tabs: OSD, Preference, Advanced,

46 System > Image > Preference In Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust the brigh

47 ENGLISH System > Image> Advanced Click Default button will back to factory default setting.  Shutter Time: Adjust the shutter time level

48 Option Shutter Time Range (sec.) Indoor NTSC: 1/125 ~ Selected number in "Sense-up" PAL: 1/100 ~ Selected number in "Sense-up&qu

49 ENGLISH System > Image> Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Ar

50 System > Video Stream > General  Input Resolution: Select the video resolution that is the maximum resolution supported in Stream 1 and Str

51 ENGLISH System > Video Stream > Stream1  Basic Mode Click Apply to save the configuration. − Resolution: There are 6 resolutions can be c

52 − Video Frame Rate: The video refreshing rate per second. − GOP Size: It means "Group of Pictures". − Video Format: H.264 or JPEG −

53 ENGLISH System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 6 resolutions can sele

54  Advanced Mode Click Apply to save the configuration. − Resolution: There are 6 resolutions can select -- 1280x1024, 1280x800, 1280x720, 640x480

55 System > Video Stream > Stream3 3GPP Streaming is designed for mobile viewing.  Stream 3 Setting: Enable or Disable 3GPP Streaming.  3GP

56 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera while connected to a microphone to remote site; User c

57 ENGLISH System > SD Card Please insert microSD/SDHC card before use it. Make sure pushing microSD/SDHC card into the slot completely.

58 Event > Arrangement > Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to

59 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record si

60 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

61 ENGLISH Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to s

62 Output Setting: Mode setting: OnOff Switch: Relay status is based on sensor triggered times. Time Switch: To restore the origin

63 ENGLISH Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera a

1 ENGLISH Preface The FV1306 is an H.264, 720p super min vandal proof dome camera designed ultra-discreet, recessed-mount and super

64  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IPcamera and PC connect to the internet d. Device neede

65 ENGLISH Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power and Ethernet cabl

66 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for FV1306.

67 ENGLISH Appendix FV1306 is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and

68 COPYRIGHT © 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted

69 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

70 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

2 Hardware 2-Axis Gimbal Adjustments Angle Pan: 360∘ Tilt: 20∘~ 90∘ Dimensions Φ80 x 67 (mm) Operation Temperature 0°C ~ 45°C Weight 350g Networ

3 ENGLISH System Security Password protection, IP address filtering, HTTPS encrypted data transmission, QoS/DSCP Firmware upgrade HTTP mode, can be