Aver SF2012H user manual Bedienungsanleitung

AVer SF2012H User Manual

6 Hardware Installation and I/O Pin Assignment 1. Connect power adapter. 2. Connect IP camera to PC or network with Ethernet cable. 3. Set up th

7 5. Set up the IP camera through Power over Ethernet (PoE). POE is a technology that integrates power into a standard LAN infrastructure. It enable

8 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “IP i

9 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

10 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it the

11 Finding IP Camera by using “IP installer” Use the software, “IP Installer” to assign the IP address of the IP camera. The software is in the attac

12 IP Installer configuration: IP Installer will search all IP cameras connected on the LAN. The user can click “Search Device” to search again. Cli

13 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

14 IP camera IP addresses: i. A quick way to access remote monitoring is to left-click the mouse twice on a selected IP camera in “Device lists” in

15 ii. Then, please key in the default “User name” and “Password”, both of which are “admin”.

Table of Contents PREFACE ... 1 PRODUC

16 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

17 5 When the following dialogue box appears, click “Yes”.

18 Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can expand and

19 Name Function (2) Login IP Show PC’s IP address (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera’s

20 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

21 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from our w

22 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

23 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the curr

24 password in “Confirm”. Then, click “Add/Set”.  User List: Click edit to change the account password. To delete the user account, click Remove

25 System > Network Setting>Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the video v

SYSTEM > NETWORK SETTING>DDNS ... 26 SYSTEM > NETWORK SETTING &

26  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Password

27  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed(

28 System > Network Setting >Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to sa

29  Security: Yes is required account and password to connect with this IP camera through ONVIF protocol. No is not required account and password to

30 System > Network Setting >Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server. Mult

31 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

32 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

33 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

34 System > Image Admin and operator levels can adjust the Image setting. There are 5 tabs: OSD, Preference, Exposure, Advanced, and Privacy Mas

35 System > Image>Preference In Preference tab, you can tune the IP camera white balance, display color or black & white, set the flicker

COPYRIGHT ... 57 NOTICE ...

36 System > Image>Advanced Click Default button will back to factory default setting.  Night Mode: select the setting of night mode.  IR Cut

37 System > Image>Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Area 2, Area

38 System > Video Stream>General  Input Resolution: Select the video resolution that is the maximum resolution supported in Stream 1 and Strea

39 System > Video Stream>Stream1  Basic Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can be chosen -- 160

40 − Video Format: H.264 or JPEG − RTSP Path: It’s a URL address

41 System > Video Stream>Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can select -- 1600x

42  Advanced Mode Click Apply to save the configuration. − Resolution: There are 8 resolutions can select -- 1600x 1200, 1280x1024, 1280x960, 1280x

43 System > Video Stream>Stream3 [Note] 3GPP mode suggested setting: 176x144 resolution, 5FPS, MPEG-4 format.  Stream 3 Setting: Enable or Di

44 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera built-in MIC (depending on different models) to remote

45 System > SD Card Please Insert SD/SDHC card before using it. Make sure pushing SD/SDHC card into the slot completely. [Note]The

1 Preface The 2-megapixel SF2012H is a box IP camera (network camera) with interchangeable lenses and suitable housing for both indoor and outdoor

46 Event > Arrangement>Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to s

47 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record s

48 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

49 Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to some speci

50 Output Setting: Mode setting: OnOff Switch: Relay status is based on sensor triggered times. Time Switch: To restore the origin

51 Status Information Click Apply button to save the configuration.  Networking Info: Displays network information of the IP camera.  Product Info

52 Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera and PC con

53  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IP camera and PC connect to the internet d. Device nee

54 Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power, press and hold the button

55 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for SF2012

2 Hardware Power over Ethernet Yes Power DC 12V, 450mA Dimensions(WxHxL) 65 x 58 x 132 mm Network Ethernet 10/100 Base-T Network Protocols HTTP,

56 Appendix SF2012H is compliant with SD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class 4 above (Max. 32G)

57 FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

58 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

59 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

3 SD/SDHC Card Management Recording triggers Motion Detection, IP Check, Network Breakdown (wire only), Schedule, Alarm Video Formats AVI, JPEG Vid

4 Package contents Item Descriptions 1. SF2012H 2. Accessory pack 3. Ethernet cable 4. Power Adapter (DC12V/1A) (Optional) 5. CD (User’s M

5 Product Installation Monitor Settings 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.